Skip to content
Notifications
Clear all

Reel Preferences

Page 2 / 2
cfronczek89's avatar
(@cfronczek89)
New Member Registered

all my reels are penns but like ive been telling everyone ima make a change. ima buy avet 80 wides from now, 1st reason the light weight 2nd reason better drag 3rd reason easyer to find parts 4th reason it has 2 speed after a long night ur all beat up cause of the yaking and fighting sharks now u have 2 rods that havent got hit so that means u got to drag 2 big rocks with ur bait, thats a bad deal

i only have one reel thats 2 speed and its my TLD 50, this is the reel i use for small baits. onces i get hit its easyer to set the hook and when the shark is running towards u its alot faster than the senators

Your chang to Avets have anything to do with the fact that you keep winning them :lol:

I have 14/0 12/0 and an 80W. Trading the 14/0 for another 80. Only problem is the cost of braid, but that's a one time purchase that can last a long time if fished right.


ReplyQuote
Posted : 03/21/2011 10:38 am
bimini boy's avatar
(@bimini-boy)
New Member Registered

avet and shimano reels and star and harrington rods


ReplyQuote
Posted : 03/22/2011 11:49 am
timmyt's avatar
(@timmyt)
New Member Registered

Everybody has there own style of fishing so the reels they use vary but lever drag is the shiat!!! :mrgreen:


ReplyQuote
Posted : 03/22/2011 7:58 pm
Tarpon J's avatar
(@tarpon-j)
New Member Registered

I have several different brands of reels..I have several spinning reels either quantum or shimano brand mostly 4000 class and they all are great..once summer gets here my spin reels take a good beating from big snooks, some of my spin gear is even recommended for freshwater only but hold up great in the salt as well. I own 2 penn reels, an old school 12/0 and an old school 209 which I took the levelwinder off they are great reels and built to last they will take whatever punishment I throw at em. I also own a shimano tld 25 and an avet lx..these 2 reels in particular have been beaten to hell for the past year and a half catching fish way bigger than they were made for and doing it well. I have never had em serviced I do the work on em myself because they have not needed any major repairs these reels are made with durable parts and I break em down every couple months to clean em out, but there is little to no junk inside em the sand and the salt stays out for the most part. I don't have a preference, just give me something that is well made, if it is well made and you take care of it you get your money's worth. I like to spray or wipe my reels and rods down with lube every couple trips it makes em nice and shiny :lol: and makes cleaning em easier, it beads up the saltwater and keeps it off the reel, and also protects your reel and rod from the sun.


ReplyQuote
Posted : 03/23/2011 5:00 pm
timmyt's avatar
(@timmyt)
New Member Registered

Amen brother! :mrgreen: :mrgreen:


ReplyQuote
Posted : 03/23/2011 5:11 pm
JDHAMMER's avatar
(@jdhammer)
Noble Member Registered

I have a duel 4:0 Wide. Had it for about one year. It is two speed. Full speed forward and half speed backward. I DON"T KNOW HOW DURABLE IT IS. I had a penn 14:0 that I gave to Arron and hes still useing it. I got the reel in 1974. No maintance. Lets see if I CAN DO THIS WITH THE DUEL. :o :o :shock: :oops: :D :D My only Harnell is from 1968. Its the rod on my duel. :shock: :D Iv'e been shark fishing since then. I was born in 1950 can you tell how old I am. :shock: :shock: :o :o :D :lol:LEARNED TO SHARK AT THE LAKE WORTH PIER IN 1964. :o :o :D


ReplyQuote
Posted : 03/23/2011 6:53 pm
slasherx4's avatar
(@slasherx4)
Noble Member Registered

I have a duel 4:0 Wide. Had it for about one year. It is two speed. Full speed forward and half speed backward. I DON"T KNOW HOW DURABLE IT IS. I had a penn 14:0 that I gave to Arron and hes still useing it. I got the reel in 1974. No maintance. Lets see if I CAN DO THIS WITH THE DUEL. :o :o :shock: :oops: :D :D My only Harnell is from 1968. Its the rod on my duel. :shock: :D Iv'e been shark fishing then. I was born in 1950 can you tell how old I am. :shock: :shock: :o :o :D :lol:LEARNED TO SHARK AT THE LAKE WORTH PIER IN 1964. :o :o :D

To all the people that know how jd treats his reels :lol: those particular senators have been through hell and back :twisted:


Just an average fisherman.

ReplyQuote
Topic starter Posted : 03/23/2011 7:28 pm
timmyt's avatar
(@timmyt)
New Member Registered

PENNS ARE BUILT TO LAST.....just like JD HAMMER!!!!!!!!!! :lol: :lol: :lol: :lol: :lol: :lol: :D :D :D :mrgreen:


ReplyQuote
Posted : 03/23/2011 9:41 pm
Pantyhosesharker's avatar
(@pantyhosesharker)
Honorable Member Registered

My question is to all those who own Avets, how tough are they when sand penetrates? What are your experience with that???


ReplyQuote
Posted : 03/24/2011 8:15 pm
Cape_Haze_Rods's avatar
(@cape_haze_rods)
Prominent Member Registered

My question is to all those who own Avets, how tough are they when sand penetrates? What are your experience with that???

I have fished Avet reels for 10 years now I fish the sand a lot and I never wash my reels, once a year in the winter I'll take them apart and clean them, they still work like new. they hold up better than everyone thinks.


ReplyQuote
Posted : 03/25/2011 8:47 am
Pantyhosesharker's avatar
(@pantyhosesharker)
Honorable Member Registered

My question is to all those who own Avets, how tough are they when sand penetrates? What are your experience with that???

I have fished Avet reels for 10 years now I fish the sand a lot and I never wash my reels, once a year in the winter I'll take them apart and clean them, they still work like new. they hold up better than everyone thinks.

good, i like that answer!


ReplyQuote
Posted : 03/25/2011 10:38 pm
sharkinmiami's avatar
(@sharkinmiami)
Prominent Member Registered

Ima have to go with Shimano.


Colby Uva : Bullbuster Team Captain
Buy Fishing Line Online and get half off retail prices at Bullbuster.net!
https://plus.google.com/u/0/b/107013063084498996341/


SFSC-Tagging/Fishing Science Coordinator

ReplyQuote
Posted : 03/25/2011 11:04 pm
Page 2 / 2